Maintenance Safety Of Mining Machinery

The maintenance and upkeep of mining machinery is an extremely important and routine task, which should be closely coordinated with the operation and maintenance of the machine, and there should be dedicated personnel on duty for inspection.
(1) Bearings. The bearings of mining machinery bear all the load of the machine, so good lubrication has a great relationship with the bearing life, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good.
(2) Newly installed wheels are prone to loosening and must be checked regularly.
(3) Pay attention to checking whether all parts of the machine are working properly.
(4) Pay attention to checking the degree of wear on easily worn parts and replace worn parts at any time.
(5) The bottom frame surface of the movable device should be cleaned of dust and other objects to prevent the movable bearings from moving on the frame when the machine encounters unbreakable materials, which may lead to serious accidents.
(6) If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it.
(7) If there is any impact sound during the operation of the transmission gear, it should be stopped immediately for inspection and eliminated. How to install and debug vibrating screens for mining machinery. Installation and debugging of mining machinery vibrating screens: There are many types of vibrating screens, including shaking screens, circular vibrating screens, resonance screens, linear vibrating screens, etc., and their structures are also different. Users need to install, use, and maintain different screening machines in a reasonable manner.
1. Preparation before installing the vibrating screen:
The new vibrating screen equipment should be carefully inspected before installation. Due to the long storage time of finished product inventory in manufacturing, such as bearing rust, aging of seals, or damage during transportation, new parts need to be replaced when encountering these problems. Also, if the exciter is rust proof before leaving the factory and injected with rust proof oil, it should be replaced with lubricating oil before being officially put into operation. Before installation, you should carefully read the instructions and make sufficient preparations.
2. Installation of vibrating screen:
3. Vibration screen trial operation:
After the installation of the screening machine is completed, an empty car test run should be carried out to preliminarily check the installation quality and make necessary adjustments.