1. As construction machinery is a special vehicle, operators should receive training and guidance from the manufacturer, have a sufficient understanding of the structure and performance of the machine, and gain certain experience in operation and maintenance before operating the machine. The "Product Use and Maintenance Manual" provided by the manufacturer is a necessary document for operators to operate the equipment. Before operating the machine, it is necessary to read the "Use and Maintenance Manual" and carry out operation and maintenance according to the requirements.
2. Pay attention to the workload during the running in period. Half of the workload during the running in period should not exceed 60% of the rated workload, and suitable workload should be arranged to prevent overheating caused by long-term continuous operation of the machine on site.
3. Pay attention to regularly observing the indications of various instruments. If any abnormalities occur, stop the vehicle in a timely manner to eliminate them. Stop the operation until the cause is found or the fault is eliminated.
4. Pay attention to regularly checking the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid, and fuel oil (water), and pay attention to checking the sealing of the entire machine. During the inspection, it was found that there was an excessive shortage of oil and water, and the cause should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add lubricating grease to the lubrication points every shift during the running in period (except for special requirements).
5. Keep the machine clean, adjust and tighten loose parts in a timely manner to prevent further wear or loss of parts due to looseness.
6. At the end of the running in period, the machine should be subjected to mandatory maintenance, inspection and adjustment work should be carried out, and attention should be paid to the replacement of oil. In summary, the requirements for the use and maintenance of loaders during the running in period can be summarized as: strengthening training, reducing load, paying attention to inspection, and strengthening lubrication. As long as you attach importance to and implement maintenance and upkeep during the running in period of the loader according to requirements, it will reduce the occurrence of early failures, extend the service life, improve work efficiency, and bring more benefits to the machine.
