Operating procedures for loaders

1) Before driving and operating, operators should be familiar with the various performance, structure, technical maintenance, operation methods of loaders, and operate them according to regulations.
2) Passengers are strictly prohibited from other places on the aircraft except outside the driver's cabin.
3) When unloading materials into the car, the bucket must be raised to a height that does not touch the car body guard, to prevent the bucket from touching the car body, and it is strictly prohibited to cross the bucket from the top of the car cab.
4) When going downhill, use automatic deceleration and do not step on the clutch pedal to prevent power interruption and slipping accidents.
5) After the loader is submerged in water, it should be stopped immediately for inspection. If brake failure is found due to water immersion, continuous braking should be carried out to use heat to remove moisture from the brake pads, in order to restore the brakes to normal as soon as possible.
6) When the loader is working, no one is allowed to stand in front of it, and during the driving process, the bucket is not allowed to carry people.
7) During work, it is strictly prohibited to stand under the shovel arm, and unrelated personnel and other machinery are prohibited from working and passing through here.
8) High speed operation is strictly prohibited.
9) When the operator leaves the driving position, they must land the bucket, turn off the engine, and cut off the power.